Showing 1–16 of 19 results

05-10 Jeep Grand Cherokee (WK) Front Winch Bumper

$31.00$36.00

Looking for enhanced protection and winching capabilities for your 05-10 Jeep Grand Cherokee (WK)? Our WK Front Winch Bumper is a great solution without compromising approach angle or appearance. With slight modification to the hidden factory sheet metal, this bumper incorporates a recessed winch plate beneath the grill while maintaining the overall depth of the factory bumper.

The slotted version of this bumper provides extra airflow to the radiator, while the standard version offers increased protection to the radiator. Designed to be cut from 3/16″ and 1/4″ plate.

84-01 Jeep Cherokee (XJ) Front Non-Winch Bumper

$30.00

The Flatland 4×4 Jeep Cherokee front non-winch bumper is a great way to add protection to the front of your XJ while maintaining the classic XJ appearance. Designed to be cut from 3/16″ and 1/4″ plate.

Please note: Fender sheet metal behind factory bumper will need to be trimmed flush with headlight or bumper will need to be modified to fit accordingly.

84-01 Jeep Cherokee (XJ) Front Winch Bumper

$30.00

The Flatland 4×4 Jeep Cherokee front winch bumper is a great way to add protection to the front of your XJ while maintaining the classic XJ appearance. Features a winch fairlead mount, recessed winch mount, and an overall height of only 9″ from the top of the winch fairlead mount to the bottom of the bumper ensuring good airflow and approach angle.

Plans include templates for a two-part, bolt-together mounting bracket system designed to provide mounting adjustability and strengthen the mounting location of the steering gear box. Designed to be cut from 3/16″ and 1/4″ plate.

Please note: Fender sheet metal behind factory bumper will need to be trimmed flush with headlight or bumper will need to be modified to fit accordingly.

84-01 Jeep Cherokee (XJ) Rear Bumper

$30.00
Rated 1.00 out of 5

y providing extra protection and built-in hitch capabilities, the Flatland 4×4 rear standard bumper for the Jeep Cherokee (XJ) increases functionality without compromising departure angle.

Bumper includes mounts that bolt both to the face of the rear sheet metal on the vehicle, and inside the unibody (frame) rail to provide extra strength. It is designed to incorporate a 2″ hitch receiver for recovery, accessories or light towing.

84-01 Jeep Cherokee (XJ) Rear Bumper with Tire Carrier

$35.00

By providing extra protection, built-in hitch capabilities, and a swing-out tire carrier, the Flatland 4×4 rear bumper with tire carrier for the Jeep Cherokee (XJ) increases functionality without compromising departure angle.

Bumper includes mounts that bolt both to the face of the rear sheet metal on the vehicle, and inside the unibody (frame) rail to provide extra strength. It is designed to incorporate a 2″ hitch receiver for recovery, accessories or light towing.

Standard and Metric PDF included with this set of drawings!

93-98 Jeep Grand Cherokee Front Bumper

$28.00$32.00
Rated 5.00 out of 5

This bumper features a slim design to provide for better clearance and approach angles, a winch mounting area, and a fairlead / winch line hole. Available features are a standard skid plate or a slotted skid plate.

Designed to be cut primarily from 3/16″ or 1/4″ steel, the parts from this bumper can all be cut from a 4×4′ sheet. Plans come with bumper mounting brackets.

Front bumper plans include templates for bumper mounts.

93-98 Jeep Grand Cherokee Front Non-Winch Bumper

$25.00

This non-winch version of our front bumper provides the protection you need without compromising your approach angle. Designed to be a direct replacement to your stock bumper, this bumper is available with a slotted skid or standard radiator skid.

93-98 Jeep Grand Cherokee Rear Bumper

$28.00$32.00

The slim design of this Rear ZJ Bumper accomodates the Front ZJ Bumper nicely as it provides for great departure angles while still maintaining a decent presence to step up on behind the lift gate.

Available with or without the built-in hitch receiver. Built-in hitch receiver model has a compartment that provides for storage / hitch receiver security as well as 2 shackle mounts. Parts for standard bumper can be cut from a 4’x5′ sheet. Parts for the hitch bumper can be cut from a 4’x4′ sheet.

93-98 Jeep Grand Cherokee Rear Bumper Tire Carrier

$30.00$35.00

The slim design of this Rear ZJ Bumper accomodates the Front ZJ Bumper nicely as it provides for great departure angles. It is fitted with a swing-out tire carrier and is designed to be used with a double sheer spindle or hinge.

Available with or without the built-in hitch receiver. Built-in hitch receiver model has a compartment that provides for storage / hitch receiver security as well as 2 shackle mounts. The tire carrier model of bumper is based on the ZJ Rear Bumper. More information on the bumper itself can be found here.

95-04 Toyota Tacoma Front Winch Bumper

$30.00

The Flatland 4×4 front winch bumper for the 95-04 Toyota Tacoma provides this truck with hidden winch, offroad protection.

Bumper includes winch plate and fairlead hole and mounts to the frame using a crossmember design to supply extra stability in winch pulls. Tabs on mount crossmember enable compatibility with factory engine skid plate mounting. Designed to be cut from 3/16″ steel plate.

99-04 Jeep Grand Cherokee (WJ) Front Non-Winch Bumper

$30.00
Rated 4.00 out of 5

Based on our WJ Front Winch Bumper, our non-winch design greatly increases approach angle while providing great protection for the radiator and front end.

The standard option provides maximum protection to the radiator and the slotted version increases airflow while enhancing appearance. Plans include templates for mounting brackets featuring bumper-side bolt holes for added mounting adjustability. Designed to be cut from 3/16″ and 1/4″ plate.

*NOTE* The width of the bumper shown in the “Finished Pictures” was modified to work better with the aftermarket flares. Actual width aligns with factory WJ flares.

99-04 Jeep Grand Cherokee (WJ) Front Winch Bumper

$30.00$35.00
Rated 4.50 out of 5

The Flatland 4×4 front winch bumper, for the WJ series, features a low mounting point for your winch, to maximize airflow, a winch fairlead slot, and a compact design to keep approach angles good while maintaining protection for factory components.

The standard option provides maximum protection to the radiator and the slotted version increases airflow while enhancing appearance. Plans include templates for mounting brackets featuring bumper-side bolt holes for added mounting adjustability. Designed to be cut from 3/16″ and 1/4″ plate.

99-04 Jeep Grand Cherokee (WJ) Rear Bumper

$30.00

The Flatland 4×4 rear bumper for the WJ is a great replacement for the factory bumper. Improved departure angle, and enhanced protection for the factory sheet metal, are some of the benefits of this bumper.

New! Rear tire carrier option now available.

The mounting solution for this bumper was built with the factory hitch receiver and gas tank skid plate in mind. Bumper can be installed without removing either accessory completely. Designed to be cut from 3/16″ steel plate.

*Special thanks to “Mark” for assistance with tire carrier measurements.*

99-04 Jeep Grand Cherokee (WJ) Rear Bumper Tire Carrier

$30.00

The Flatland 4×4 rear bumper for the WJ is a great replacement for the factory bumper. Improved departure angle, and enhanced protection for the factory sheet metal, are some of the benefits of this bumper.

New! Rear tire carrier option now available.

The mounting solution for this bumper was built with the factory hitch receiver and gas tank skid plate in mind. Bumper can be installed without removing either accessory completely. Designed to be cut from 3/16″ steel plate.

*Special thanks to “Mark” for assistance with tire carrier measurements.*

Production Pack (5 Product License)

$125.00

In response to popular demand, we have developed a licensing plan for production of our products. Available below are 5-pack licenses that will allow you to produce and sell products of your own using our products (designs). Save time and money by purchasing a 5 product license today.

Each Production Pack licenses you to produce and sell any combination of products, based on our design, up to quantity 5 for each license you purchase. Any additional production must be preceded by another license pack purchase. Each production license purchase includes one set of drawings of your choice. Additional drawings may be purchased individually, to be used in conjunction with a license pack, or by purchasing an additional license packs.

For example: You purchase a production license and request a set of WJ Front Nonwinch drawings. You also purchase a set of drawings for an XJ Front Winch bumper. You may produce and sell up to 5 bumpers such as 3 WJ bumpers and 2 XJ bumpers, etc.

Please read our Licensing Pack Terms and Conditions agreement for more information.